extron dtp crosspoint 108 4k

Extron DTP CROSS­POINT 108 4K

DTP CrossPoint 108 4K

specification


Frame rate1

24, 25, 30, 50, or 60 fps


Chroma sampling1

4:4:4, 4:2:2, or 4:2:0


Color bit depth1

8 bits per color


Signal type

HDMI 1.4, HDCP 1.4


Max. video data rate

10.2 Gbps (3.4 Gbps per color)


Video

Routing

10 x 8 matrix


Maximum data rate

10.2 Gbps (3.4 Gbps per color)


Maximum pixel clock

300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)


Resolution

Up to 2560x1600* @ 60 Hz or

4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz

4K/UHD @ 60 Hz with 4:2:0 chroma subsampling**

(* reduced blanking)

(**  supported only at non-scaled HDMI outputs)


Formats

RGB and YCbCr digital video


Standards

DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E


Video input

Number/signal type

6 HDMI digital video (HDCP compliant)

4 DTP or XTP (configurable)


Connectors

6 female HDMI type A

4 female RJ-45


Matrix video outputs (non scaled)

Number/signal type

4 HDMI digital video (HDCP compliant)


Connectors

4 female HDMI

Video output power for active cables (HDMI pin 18)

6.6 W total power for all HDMI ports, 1.1 W per HDMI port max


Scaled TP outputs

Number/signal type

4 DTP, XTP, or HDBaseT (configurable)

2 buffered HDMI digital video (HDCP compliant)


Connectors

4 female RJ-45

2 female HDMI


Video processing

Digital pixel data bit depth

8, 10, or 12 bits per channel; 300 MHz pixel clock (HDMI)


Colors

1.07 billion (10-bit processing)


Video input

Horizontal frequency

15 kHz to 100 kHz

Vertical frequency

24 Hz to 75 Hz


Resolution range

640x480 to 1600x1200 and 1920x1200* 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K through 4K @ 30 Hz

*reduced blanking


Scaled resolutions

640x4808, 800x6008, 852x4808, 1024x7688, 1024x8528, 1024x10248,1280x7688, 1280x8008, 1280x10248, 1360x7658, 1360x7688, 1365x7688, 1366x7688, 1365x10248, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008

HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8,, 1920x21601,2,3,4,5,6,7,8, 1920x24002,3,5,8, 2048x12008, 2048x15368, 2048x21601,2,3,4,5,6,7,8, 2048x24002,3,5,8, 2560x10808, 2560x14408, 2560x16008, 3840x21601,2,3,4,5, 3840x24005, 4096x21601,2,3,4,5

1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz,

6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz


Logos

Number

16 logos


Resolution range

Up to 4096x2160


Image file formats

BMP, JPG, PNG, TIFF


Logo effects

Transparency, RGB key, level key, alpha key


Shielded twisted pair interconnection

Connectors

Female RJ-45


Termination standard

TIA/EIA T568B


Signal transmission distance

Resolutions up to 1920x1200 and 1080p

DTP 330

Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable

DTP 230

Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 TP cable

2560x1600* and 4k @ 30 Hz (* reduced blanking)

DTP 330

Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable

DTP 230

Up to 130' (40 m) using shielded twisted pair cable or XTP DTP 24 TP cable


Cable requirements

Solid conductor, 24 AWG or better


Cable recommendations

400 MHz bandwidth, STP (shielded twisted pair)

Audio system (mic/line input to line output)

Gain

Unbalanced output: -6 dB; balanced output: 0 dB


Frequency response

20 Hz to 20 kHz, ±0.2 dB


Input impedance

>10k ohms unbalanced, >20k ohms balanced


THD + Noise

0.01% at 1 kHz nominal level


S/N

105 dB at maximum balanced output (unweighted)


Crosstalk

<-90 dB @ 20 Hz to 20 kHz, fully loaded


Stereo channel separation

>80 dB @ 20 Hz to 20 kHz


Digital conversion

24-bit, 48 kHz


Audio

Routing

10 x 8 stereo switching matrix

4 x 4 microphone mixing matrix


Supported formats — Pass through

HDMI connectors

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel


Analog conectors

Analog stereo audio

DTP connectors

De-embedded from HDMI [PCM only] or remote balanced/unbalanced analog


Audio input

Number/signal type

6 stereo, analog line level, balanced or unbalanced

6 stereo, de-embedded from HDMI (PCM only)

4 DTP (de-embedded from HDMI [PCM only] and remote balanced/unbalanced analog), or XTP (embedded digital)


Connectors

(6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs

6 female HDMI type A

4 female RJ-45


Analog audio

Nominal level

+4 dBu, -10 dBV adjustable via input gain


Maximum level

+21 dBu balanced, +15 dBu unbalanced


Input gain adjustment

-18 dB to +24 dB, 0.1 dB steps, adjustable per input


Mic/line input

Number/signal type

4 mono, mic/line, balanced/unbalanced (with phantom power)


Connectors

(4) 3.5 mm captive screw connectors, 3-pole


Impedance

10k ohms unbalanced, 20k ohms balanced


Nominal level

-60 dBV, +4 dBu, -10 dBV, adjustable via input gain


Maximum level

>+21 dBu at rated THD+N when mic gain is set to 0 dB


Equivalent input noise

<-120 dBV (1.0 µVrms) at +40 dB input gain

CMRR

>70 dB typical


Input gain adjustment

-18 dB to +80 dB, in 0.1 dB steps, adjustable per input


Microphone volume range

-100 dB to +12 dB

DC phantom power

+48 VDC, ±10% (inputs 1-4) switched on or off


Audio output

Number/signal type

6 HDMI embedded

4 DTP (embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), or HDBaseT (embedded digital)

4 stereo balanced/unbalanced analog (variable)

1 SPDIF


Connectors

6 female HDMI

4 RJ-45

(4) 3.5 mm captive screw, 5-pole

(1) RCA


Impedance

Stereo audio

50 ohms unbalanced, 100 ohms balanced

S/PDIF

75 ohms


Gain error

±0.1 dB channel to channel


Maximum level (Hi-Z)

>+21 dBu, balanced or +15 dBu unbalanced


Output volume range

0 to -100 dB in 0.1 dB steps


EXP port

Transmission type

Proprietary


Connectors

1 RJ-45

Inputs


16 channels Rx

Outputs

16 channels Tx


Audio format

24 bit, 48 kHz sampling, uncompressed


EXP cable

Shielded CAT 6 up to 10 meters


Audio output — power amplifier (DTP CrossPoint 108 4K IPCP SA and DTP CrossPoint 108 4K IPCP MA models)

Number/signal type

SA models

1 stereo or mono (2 channels total)


MA models

1 mono, 70 V


Connector

SA models

(1) 5 mm screw lock captive screw connector, 4-pole

MA models

(1) 5 mm screw lock captive screw connector, 2-pole


Load impedance

SA models

4 ohms minimum

MA models

50 ohms minimum


High pass filter (MA models)

80 Hz, 12 dB/octave roll off


Amplifier type

Class D


Output power

SA models

25 watts (rms) per channel, 8 ohms, 1 kHz, 0.1% THD

50 watts per channel, 4 ohms, 1 kHz, 0.1% THD

MA models

100 watts (rms) @ 70 V, 1 kHz, 0.1% THD


Protection

Clip limiting, thermal, short circuit, DC output

Frequency response

SA models

20 Hz to 20 kHz, +1/−3 dB @ 1 watt

MA models

80 Hz to 20 kHz, +1/−3 dB @ 1 watt


THD + Noise

<0.1%, 1 kHz, 3 dB below clipping


S/N

>90 dB, 20 Hz to 20 kHz, unweighted


Communications — switcher

Serial control port

1 bidirectional RS-232, 3.5 mm captive screw connector, 3-pole (rear panel)


Baud rate and protocol

9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity (default)


Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd


USB control port

1 front panel female USB mini-B


USB standards

USB 2.0, low speed


Ethernet control port

1 female RJ-45 connector


Ethernet data rate

10/100Base-T, half/full duplex with autodetect


Ethernet protocol

DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP, ARP, Telnet


Ethernet default settings

Link speed and duplex level = autodetected

IP address = 192.168.254.254

Subnet mask = 255.255.0.0

Default gateway = 0.0.0.0

DHCP = off


Web server

Up to 200 simultaneous sessions

40.0 MB nonvolatile user memory


Program control

Extron control/configuration program for Windows®

Extron Simple Instruction Set (SIS™)

Microsoft® Internet Explorer®, Telnet


Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over TP)

Serial control pass-through ports

DTP CrossPoint 108 input/TP Tx

RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports)

DTP CrossPoint 108 output/TP Rx

RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports)


Baud rates

300 to 115200 baud


Protocol

8 or 7 data bits

1 or 2 stop bits

no parity (default), even, odd, mark, or space parity


Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd


IR pass-through control ports

(1) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

DTP CrossPoint switcher input/TP Tx

(4) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports)

DTP CrossPoint switcher output/TP Rx

(4) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports)


IR control pin configuration

3 = Gnd, 4 = IR Tx, 5 = IR Rx


Control Processor – DTP CrossPoint 108 4K IPCP Models

Memory

SDRAM

512 MB


Flash

4.5 GB


Software and control options

Software

Extron Global Configurator Plus and Professional for Windows®


Control options

GlobalViewer®, TouchLink® for Web, TouchLink for iPad®, or TouchLink Pro touchpanels


Ethernet control

Network interface controllers (NICs)

1


Network switch

1 unmanaged 3 port switch


Connectors

3 female RJ-45 connectors


Data rate

10/100/1000Base-T, half/full duplex with autodetect


Protocols

DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP


Default settings

Link speed and duplex level = autodetected

IP address = 192.168.254.250

Subnet mask = 255.255.255.0

Gateway = 0.0.0.0

DHCP = off

DNS: 127.0.0.1


Serial control

Quantity/type

1 bidirectional RS-232, RS-422, RS-485 (port 1)

2 bidirectional RS-232 (ports 2 and 3)


Connectors

(1) 3.5 mm captive screw connector, 5-pole

(2) 3.5 mm captive screw connectors, 3-pole


Baud rate and protocol

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;

no parity (default), even, odd, mark, or space parity


Pin configurations, serial, 5-pole captive screw

RS-232 (default)

Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS

RS-422

Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+

RS-485

Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+

Pin configurations, serial, 3-pole captive screw

Pin 1 = Tx, 2 = Rx, 3 = Gnd


Digital I/O control

Quantity/type

4 digital input/output (configurable)


Connectors

(1) 3.5 mm captive screw connector, 5-pole


Digital inputs

Input voltage range

0 to 24 VDC, clamped at +30 VDC


Input impedance

29k ohms


Programmable pullup

1k ohms to +5 VDC


Threshold low to high

>2.8 VDC


Threshold high to low

<2.0 VDC


Digital outputs

250 mA sink from 24 VDC max.


Pin configurations

1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd


IR/serial control

Quantity/type

2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz


Connector

(1) 3.5 mm captive screw connector, 5-pole

Baud rate and protocol (RS-232)

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;

no parity (default), even, odd, mark, or space parity


Pin configurations

For each port, pin 1 = signal, 2 = Gnd

IR output carrier frequency

30 kHz to 300 kHz


Relay control

Quantity/type

4 normally open relays

Relay control connectors

(1) 3.5 mm captive screw connector, 6-pole


Relay control contact rating

24 VDC, 1 A


General

Power supply

Internal

Input: 100-240 VAC, 50-60 Hz


Power consumption

DTP CrossPoint 108 4K IPCP MA

184 watts

DTP CrossPoint 108 4K IPCP SA

179 watts

DTP CrossPoint 108 4K (non-IPCP)

154 watts


Remote power capability

Supports up to eight endpoints (four DTP Tx, four DTP Rx) (remote power not available in XTP and HDBaseT modes)


Temperature/humidity

Storage: -40 to +104 °F (-40 to +40 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing


Cooling

Fans, air flows from right to left (as viewed from front panel)


Thermal dissipation

DTP CrossPoint 108 4K IPCP MA

499 BTU/hr

DTP CrossPoint 108 4K IPCP SA

486 BTU/hr

DTP CrossPoint 108 4K (non-IPCP)

440 BTU/hr


Mounting

Rack mount

Yes


Enclosure type

Metal


Enclosure dimensions

5.25" H x 17.4" W x 16" D (3U high, full rack wide)

(133 mm H x 432 mm W x 406 mm D)

(Depth excludes connectors and knobs. Width excludes rack ears.)


Product weight

17 lbs (7.7 kg)


Regulatory compliance

CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI,

complies with the appropriate requirements of RoHS, WEEE.


Product warranty

3 years parts and labor

(4633-D15-070819)


NOTE

1Subject to the maximum data rate limit. Use our calculator (http://www.extron.com/product/videotools.aspx) to determine video parameters supported by this data rate.


NOTE

Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.


NOTE

Input and output mode signaling:

DTP:        HDMI with embedded audio, analog audio, RS-232 and IR, and remote power

XTP:        HDMI with embedded audio plus RS-232 and IR

HDBT:    HDMI with embedded audio plus RS-232 and IR


NOTE

Unbalanced analog inputs at a DTP Tx input have +12 dB of gain applied to bring the signal to a nominal level for balanced operation.


NOTE

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu


NOTE

This connector accepts wires of 22 AWG to 12 AWG.


NOTE

Protocol is mirrored between the connected TP endpoints and the "Over TP" ports on the DTP CrossPoint switcher. Signals from a control device pass into each DTP CrossPoint 108 "Over TP" port, are embedded with the TP signal, and sent to individual TP Tx or Rx endpoints for control of remote sink or source devices.

The "Over TP" ports are simply pass-through connections to TP endpoints. There is no IR insertion from any DTP CrossPoint 108 control port to the “Over TP” ports. RS-232 can be inserted from the Ethernet connection.


NOTE

The 5-pole ports support both hardware and software flow control.

The 3-pole ports support software flow control.

The default for both types of ports is no flow control.


NOTE

Specifications are subject to change without notice.


NOTE

All nominal levels are at ±10%.


Shipping Dimensions and Weights

60-1381-01

22.88" (58.1 cm)

21.0" (53.3 cm)

9.0" (22.9 cm)

18.12 lbs (8.22 kg)

KUNTA-AV%20LOGO-me.png

Yh­teys­tie­dot

KUNTA-AV


info@kunta-av.fi

kunta-av.fi


Ritalankatu 31

33400 Tampere

© Coaxial  OY 2020