extron nav10sd 101

Extron NAV10SD 101

NAV 10SD 101

specification — NAV 10SD Decoder

Frame rate2

24, 25, 30, 50, or 60 fps

Chroma sampling2

4:4:4, 4:2:2, or 4:2:0

Color bit depth2

8, or 10 bits per color

Signal type

DVI v 1.0, HDMI v1.4 and v2.0, HDCP v1.4 and v2.2

Max. video data rate

18 Gbps (6 Gbps per color)


Video input stream

Number/signal type

1 PURE3TM digital video over IP

Connector

1 SFP+ connector (SM or MM)


Video processing

Digital sampling

8 or 10 bits per color; 600 MHz pixel clock maximum

Compression

PURE3

Latency

<1 frame (encode/decode)

Scaling

VectorTM


Video output

Number/signal type

1 digital HDMI video

Connectors

1 female HDMI type A

Resolution range

Up to 4K (4096x2160 at 60 Hz) and UHD (3840x2160 at 60 Hz)

Scaled resolution

640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008, 2048x12008, 2048x15368, 2056x10808, 2560x14408, 2560x16008, bypass*

480p7,8, 576p6, 720p3,4,5,6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x1080 (2K)1,2,3,4,5,6,7,8

3840x21601,2,3,4,5,6,7,8, 4096x21601,2,3,4,5,6,7,8

1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz

Standards

DVI v1.0, HDMI v2.0, HDCP v1.4/v2.2

Formats

RGB and YCbCr digital video


Audio

Gain

Unbalanced output: 0 dB, balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, +0.5 dB

THD + Noise

<0.1% @ 20 Hz to 20 kHz at nominal level

S/N

>90 dB, at maximum output, balanced (unweighted)

Crosstalk

<-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

Sampling rates

48 kHz

Bit depths

24 bit


Audio input stream

Number/signal type

1 audio over IP LPCM or AES67

Connector

1 SFP+ connector (SM or MM)

Audio output

Number/signal type

1 analog stereo, unbalanced or balanced

1 digital stereo, de-embedded from HDMI

Connectors

(1) 3.5 mm captive screw connector, 5 pole

1 female HDMI (shared with video output)

Supported formats

LPCM (2 channel), analog stereo

Impedance

50 ohms unbalanced, 100 ohms balanced

Maximum level (Hi-Z)

>+12 dBv balanced, +6 dBv unbalanced

Gain error

+0.5 dB channel to channel

Volume control range

-100 dB to 0 dB (control 0 to 100 in 1 dB steps)


Network interconnection (NAV)

Number/signal type

2 fiber optic

Connectors

(1) 10G SFP+ connector, 2 LC connectors

Termination

MDI (SFP+)

Ethernet standards

10 Gb Ethernet 802.3ae, 10GBase-LR (SFP+) SM, and 10GBase-SR (SFP+) MM

Protocols

Streaming

SRTP (AES-128) on video and audio

Transport

Multicast UDP

All supported

DHCP, HTTPS, IGMPv2/v3, IPv4, PTPv2, QoS, SNMP (v2c), SSH, TCP, UDP, VLAN tagging

Security

AES-256, 802.1x, Active Directory authentication

Signal transmission distance

Singlemode

10 km (6.25 miles) with singlemode (SM) cables with 10GBASE-LR (SFP+)

Multimode

400 m (1312') with 50/125 µm OM4 cables with 10GBase-SR (SFP+)

Nominal peak wavelength

850 nm for multimode, 1310 nm for singlemode

Transmission power

Singlemode

-5.2 dBm, minimum

Multimode

-3.3 dBm, minimum

Maximum receiver sensitivity

Singlemode

-12.6 dBm, maximum

Multimode

-13.0 dBm, maximum

Optical loss budget

Singlemode

7.4 dB, maximum

Multimode

9.7 dB, maximum


Communications - external devices

Serial

Quantity/type

1 bidirectional RS-232

Connector

(1) 3.5 mm captive screw connector, 5 pole (shared with IR port)

Baud rate and protocol

300 to 115200 baud (9600 baud = default)

8 (default) or 7 data bits

1 (default) or 2 stop bits

no parity (default), even or odd parity

Pin configuration

Tx, Rx, and Gnd

IR control

Quantity/type

1 TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

Connector

(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232)

Pin configuration

S = signal and G = Gnd

IR output carrier frequency

30 kHz to 300 kHz

CEC control

1 HDMI type A connector

USB configuration port

Quantity/type

1 front panel USB mini-B

Standard

Ethernet over USB


General

Power supply

External

Input: 100-240 VAC, 50-60 Hz

Output: TBD

Power consumption

Device

TBD watts nominal, TBD watts max.

Device and power supply

TBD watts nominal, TBD watts max.

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 85%, noncondensing

Cooling

Fan, air flows from top to rear

Thermal dissipation

Device

TBD BTU/hr

Device and power supply

TBD BTU/hr

Mounting

Rack mount

Yes, with optional rack shelf

Furniture mount

Yes, with optional under desk mounting kit

Enclosure type

Metal

Enclosure

1.00" H x 8.75" W x 6.00" D (half rack wide)

(25 mm H x 222 mm W x 152 mm D)

Product weight

1.4 lbs (0.7 kg)

Regulatory compliance

CE, c-UL UL,C-tick, FCC Class A, ICES, VCCI,

Complies with the appropriate requirements of RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE

14096 x 2160 @ 50-60 Hz is available only for HDMI connectors.

NOTE

2Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.

NOTE

Indicates minimum end-to-end latency. Network and video processing dependencies may apply.

NOTE

Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPort signal output.

NOTE

When the output resolution is set to "bypass," the input signal is output without scaling.

NOTE

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

NOTE

Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

NOTE

All nominal levels are at ±10%.

NOTE

Specifications are subject to change without notice.

KUNTA-AV%20LOGO-me.png

Yh­teys­tie­dot

KUNTA-AV


info@kunta-av.fi

kunta-av.fi


Ritalankatu 31

33400 Tampere

© Coaxial  OY 2020