jbl cbt

JBL CBT 70J-1

Specifications

Components

Four 130 mm (5 in) LF drivers Sixteen 25 mm (1 in) HF drivers

Frequency Range (-10 dB)

60 Hz – 20 kHz

Coverage

Vertical (selectable via switch) Narrow Mode: 25° (2 kHz - 16 kHz) (±10°) Broad Mode: 45° (750 Hz - 16 kHz) (±10°) Horizontal 150° (500 Hz – 8 kHz, ±20°)

Sensitivity (2.83V@ 1m)

Narrow: (speech mode) 98 dB (1 kHz - 8 kHz) (music mode) 93 dB (300 Hz - 18 kHz) Broad: (speech mode) 96 dB (1 kHz - 8 kHz) (music mode) 92 dB (300 Hz - 18 kHz)

Nominal Impedance

8 ohms

Power Capacity

500 W (2000 W peak), 2 hrs 350 W (1400 W peak), 100 hrs

Max SPL

Narrow: (speech mode) 125 dB cont ave (131 peak) (music mode) 120 dB cont ave (126 peak) Broad: (speech mode) 123 dB cont ave (129 peak) (music mode) 119 dB cont ave (125 peak)

Low Frequency Drivers

4 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance, shielded.

High Frequency Drivers

16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded.

Enclosure

Fiberglass reinforced ABS cabinet, painted aluminum grille

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors

Black or white (-WH)

Insert Points

10 M6 swivel (pan)/tilt (16 mm deep) insert points on back panel.

Mounting

Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously variable +/-15 degree tilt, as well as 5 degree fixed increment points. Ten threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for OmniMount® 60.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D)

694 x 170 x 237 mm(27.4 x 6.7 x 9.3 in)

Net Weight

9.5 kg (21 lb)

Included Accessories

Swivel (pan) / tilt wall bracket

Optional Accessories

MTC-PC2 terminal panel coverMTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty speaker stand MTC-CBT-FM2 flush-mount low-profile wall-mount bracket

JBL CBT 100 LA-1

Specifications

Components

Sixteen 50 mm (2 in) Full-Range

Frequency Range (-10 dB)

80 Hz – 20 kHz

Vertical Coverage

VerticalNarrow Mode: 15° (2 kHz - 16 kHz) (±10°)Broad Mode: 40° (1 kHz - 16 kHz) (±10°)Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)

Sensitivity (2.83V@ 1m)

Narrow: (speech mode) 96 dB (2 kHz - 14 kHz )(music mode) 93 dB (300 Hz - 18 kHz)Broad: (speech mode) 93 dB (2 kHz - 14 kHz)(music mode) 90 dB (300 Hz - 18 kHz)

Nominal Impedance

8 ohms (in Thru mode)

Power Capacity (8 ohm setting)

325 W (1300W peak), 2 hrs200 W (800W peak), 100 hrs

Max SPL

Narrow: (speech mode) 121 dB cont ave (127 peak)(music mode) 118 dB cont ave (124 peak)Broad: (speech mode) 118 dB cont ave (124 peak)(music mode) 115 dB cont ave (121 peak)

70V/100V Transformer Taps

120W, 60W, 30W (15W at 70V only), and 8Ω thru, via switch

Enclosure

Fiberglass reinforced ABS cabinet, painted aluminum grille

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors

Black or White (-WH)

Insert Points

18 M6 insert points on back panel.

Mounting

Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D)

1000 x 98.5 x 153(39.4 in x 3.8 in x 6.0 in)

Net Weight

7.2 kg (15.8 lb)

Included Accessories

Swivel (pan) / tilt wall bracket

Optional Accessories

MTC-PC2 terminal panel coverMTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand

JBL CBT 200 LA-1

Specifications

Components

Thirty-two 50 mm (2 in) Full-Range Drivers

Frequency Range (-10 dB)

80 Hz – 20 kHz

Frequency Response (±3 dB)

130 Hz – 18 kHz (narrow coverage, music mode setting)

Coverage - Vertical

Narrow Mode:15° (500 Hz – 16 kHz, +15°/-2° [<60° down to 220 Hz, <90° down to 140 Hz])Broad Mode: 30° (400 Hz – 12 kHz, +15°/-8°, [<60° down to 220 Hz, < 90° down to 140 Hz])Asymmetrical Progressive-Gradient Mode: (Top speaker module set at “Narrow” and bottom speaker module at “Broad”, for “J-type” coverage, sending higher sound levels toward the far area of the listening space): 22.°(+7° from aiming axis up; -15° from aiming axis down, 300 Hz – 12 kHz, +15°/-8°, [<60° down to 220 Hz, <90° down to 140 Hz])

Coverage - Horizontal

150° (ave, 1 kHz – 4 kHz, ±20°)

Sensitivity - Narrow

(speech mode): 95 dB (2 kHz – 5 kHz)(music mode): 92 dB (150 Hz – 18 kHz)

Sensitivity - Broad

(speech mode): 93 dB (2 kHz – 5 kHz)(music mode): 90 dB (150 Hz– 18 kHz)

Sensitivity - Asymmetrical Progressive-Gradient Mode (on-axis)

(speech mode): 94 dB (2 kHz – 5 kHz)(music mode): 91 dB (150 Hz – 18 kHz)

Nominal Impedance (direct)

8Ω per half (top and bottom) for 4 ohms total (in thru mode).Min-Z for system = 2.9Ω.

Hookup

Ensure identical polarity of hookup – for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended.

Power Capacity (thru setting)

650W (2600W peak), 2 hrs400W (1600W peak) 100 hrs

Max SPL - Narrow

(speech mode): 123 dB cont ave (129 dB peak)(music mode): 120 dB cont ave (126 dB peak)

Max SPL - Broad

(speech mode): 121 dB cont ave (127 dB peak)(music mode): 118 dB cont ave (124 dB peak)

Max SPL - Asymmetrical Progressive-Gradient Mode (on-axis)

(speech mode): 122 dB cont ave (128 dB peak) (music mode): 119 dB cont ave (125 dB peak)

70V/100V Transformer Type

Set individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8Ω, via switch. Total (with top & bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4Ω. Max. insertion loss less than 1 dB at any tap.

Enclosure

Fiberglass reinforced ABS cabinet, painted aluminum grille

Connectors

Two (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), or bare wire (up to 12 AWC/2.5 mm2)

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors

Black or White (-WH)

Configuration

Two pieces (top and bottom half), each 100 cm tall, connected together via Coupler Plate. Top/bottom orientation of each piece must be observed.

Insert Points

28 M6 insert points on back panel (36 total with 8 center points being utilized by the Coupler Plate).

Mounting

Included swivel (pan) / tilt wall bracket (must be mounted to threaded points on Coupler Plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, as well as 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) located on back panel. Threaded mounting points can be utilized for suspension. Compatible with OmniMount 30.0 brackets

Dimensions (H x W x D)

2000 x 98.5 x 153 mm (78.8 x 3.8 x 6.0 in)

Net Weight

14.6 kg (33 lb)

Included Accessories

Swivel (pan) / tilt wall bracket, Coupler plate

Optional Accessories

MTC-PC2 terminal panel cover MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 pieces required) MTC-CBT-SMB1 stand-mount bracket for use with 35 mm speaker stands (heavy duty stand required)

KUNTA-AV%20LOGO-me.png

Yh­teys­tie­dot

KUNTA-AV


info@kunta-av.fi

kunta-av.fi


Ritalankatu 31

33400 Tampere

© Coaxial  OY 2020